Filter
Top Products
10
Follow these steps to install or replace batteries.
1. If the scanner is on, turn
VOLUME OFF/MAX
fully counter-
clockwise until it clicks to turn it off.
2. While pressing and holding down the battery compartment
cover on the bottom of the scanner, slide the cover in the
direction of the arrow to remove it.
3. Remove the battery holder from the battery compartment.
4. Remove any old batteries from the battery holder.
Cautions:
• Always dispose of old non-rechargeable batteries
promptly and properly. Do not bury or burn them.
• Never leave dead or weak batteries in the battery holder.
OFF
MAX
MIN MAX
VOLUME
SQUELCH
20-561.fm Page 10 Wednesday, August 4, 1999 3:48 PM