Filter
Top Products
24
Hint: If you are storing a frequency used by a specific broad-
caster (such as a racing team), you can remember where
you stored the frequency by storing it in the same channel
number as the team’s car number.
Note: If you enter an invalid channel number, the scanner
beeps three times and
Error
flashes on the display for about
4 seconds. Simply repeat this step.
3. Using the number keys, enter the frequency you want to
store into that channel. Use
BAND/
•
to enter the decimal
point.
4. Press
ENTER
to store the frequency.
Notes:
• If you entered an invalid frequency in Step 3, the scanner
beeps three times and
Error
flashes on the display for
about 4 seconds. Simply repeat Steps 3 and 4.
• Your scanner automatically rounds the entered frequency
down to the closest valid frequency. For example, if you try
to enter a frequency of 151.4730, your scanner accepts it as
151.4700.
• If you entered a frequency that is already stored in another
channel, the scanner beeps and
dUPL
flashes on the dis-
play for about 5 seconds, then the channel number where
you tried to store the duplicate frequency appears (next to
the flashing frequency).
• To store the frequency, press
ENTER
again.
• To store a different frequency, repeat Steps 3 and 4 to
enter another frequency and store it.
20-561.fm Page 24 Wednesday, August 4, 1999 3:48 PM