Filter
Top Products
32
3. After a second, release
2
and
ENTER
.
USING THE KEYLOCK
Once you program your scanner, you can protect it from acciden-
tal program changes by turning on the keylock feature. When the
keypad is locked, the only controls that operate are
LIGHT
,
VOL-
UME OFF/MAX
, and
SQUELCH MIN/MAX
. (However, the scanner
continues to scan channels).
To turn on the keylock, press and hold down for about 3 sec-
onds until the scanner beeps three times and appears on the
display. To turn it off, press and hold down for about 3 sec-
onds until the scanner beeps three times and disappears
from the display.
20-561.fm Page 32 Wednesday, August 4, 1999 3:48 PM