Filter
Top Products
20
BASIC OPERATION
TURNING ON THE SCANNER AND
SETTING SQUELCH
Note:
Make sure the scanner’s antenna is connected before you
turn it on.
1. Turn
SQUELCH MIN/MAX
fully counterclockwise.
2. Turn
VOLUME OFF/MAX
clockwise until it clicks and you hear
a hissing sound.
3. Turn
SQUELCH MIN/MAX
clockwise, then leave it set to a
point just after the hissing sound stops.
The scanner automatically starts scanning channels. Press
MAN-
UAL
to stop scanning.
Note:
If you have not stored frequencies into any channels (see
“Searching For and Storing Active Frequencies” on Page 21), the
scanner does not scan.
OFF
MAX
MIN MAX
VOLUME
SQUELCH
OFF
MAX
MIN MAX
VOLUME
SQUELCH
20-561.fm Page 20 Wednesday, August 4, 1999 3:48 PM