Filter
Top Products
CHAPTER 8: USER MANAGEMENT 77
5. Set the IP ACL (optional). This feature limits access to the Dominion KX II device by
specifying IP addresses; it applies only to users belonging to a specific group, unlike the IP
Access Control list feature which applies to all access attempts to the device (and takes
priority).
6. Click OK.
Note: Several administrative functions are available within MPC and from the Dominion KX II
Local Console; these functions are available only to members of the default ADMIN group.
Setting Permissions
Important: Checking the “User Management” checkbox allows the members of
the group to change the permissions of all users, including their own. Carefully
consider granting these permissions.
PERMISSION DESCRIPTION
Device Settings Network settings, date/time settings, port configuration (channel names, power
associations), event management (SNMP, Syslog), virtual media file server setup
Diagnostics Network interface status, network statistics, ping host, trace route to host, KX diagnostics
Maintenance Backup and restore database, firmware upgrade, factory reset, reboot
PC-Share Simultaneous access to the same target by multiple users
Security SSL certificate, security settings (VM Share, PC-Share), IP ACL
User Management User and group management, remote authentication (LDAP/RADIUS), login settings
Setting Port Permissions
For each server port, you can specify the type of access, the type of access to the virtual media,
and the power control. Please note that the default setting for all permissions is disabled.
ACCESS VM ACCESS POWER CONTROL
Option Description Option Description Option Description
None*
Denied access completely
Deny*
Virtual media permission
is denied altogether for the
port
Deny*
Denied access
completely
View
View the video (but not
interact with) the
connected target server
Read-
Only
Virtual media access is
limited to read access only
Access
Complete access
Control
Control the connected
target server
Read-
Write
Complete access (read,
write) to virtual media
* Default setting
Tip: Use the checkboxes to quickly set all the permissions the same for every port.