Filter
Top Products
CHAPTER 3: ONE-TIER CONFIGURATION 3
Chapter 3: One-Tier Configuration
Installation
1. Shut down and power OFF all computers to be connected to MasterConsole II.
2. Plug a keyboard, monitor, and mouse into the keyboard, monitor, and mouse ports on the rear panel of
the MasterConsole II.
Figure 6 MasterConsole II Rear Panel
3. Power ON the MasterConsole II.
4. Using a universal cable kit (CCPnnU), plug the 25-pin connector into one of the numbered channels on
the MasterConsole II back panel.
5. Plug the cable's other connectors into the computer's keyboard, monitor, and mouse ports, using the
supplied adapters for AT style PCs.
Figure 7 One-Tier Configuration Cabling Detail
Mouse Port
Keyboard Port Monitor Port