Filter
Top Products
3
T-3 (Raypak B6000 System Protocol Interface)
Contents Quantity
COMPACT DISC (CD) 1
T-3 1
EPROM (CPX.XNMn) in small black ESD box 1
Check packaging for damage or missing components.
IMPORTANT NOTICE: These instructions are intended for the use by qualified personnel only,
specifically trained and experienced in the installation of this type of equipment and related sys-
tem components. Installation and service personnel may be required by some states to be
licensed. If your state is such, be sure your contractor bears the appropriate license. Only quali-
fied persons shall attempt to repair this equipment. Repair must be according to these instruc-
tions.
WARNING: Improper installation, adjustment, alteration, service or maintenance may damage
the equipment, create a hazard resulting in asphyxiation, explosion, fire, electric shock, personal
injury or property damage and will void the warranty.
CAUTION: ONE SUPPLY SOURCE. TO REDUCE THE RISK OF ELECTRIC SHOCK,
DISCONNECT ALL CONNECTIONS BEFORE SERVICING.
CAUTION: RISK OF ELECTRIC SHOCK, DISCONNECT SWITCH IS REQUIRED TO DE-
ENERGIZE THE EQUIPMENT BEFORE SERVICING.
NOTE: Minimum 18 AWG, 105°C, stranded wire must be used for all low voltage (less than 30
volts) external connections to the unit. Solid conductors should not be used because they can
cause excessive tension on contact points. Install conduit as appropriate. All high voltage
wires must be the same size (105°C, stranded wire) as the ones on the unit or larger.
Thank you for selecting the Raypak B6000 Boiler Management System and the Raypak
Communication Interface. It is our sincere hope that you will enjoy its power, ease of use and
energy saving features.
Please follow the instructions carefully to insure proper installation.
FORWARD
The Raypak Communication Interface is designed to allow the Communication Interface System
to monitor and control the Raypak B6000 Boiler Management System.