Filter
Top Products
97
E-DOC-CTC-20051017-0151 v1.0
Chapter 4
Basic Configuration
Components of the
DHCP Pool page
The following settings are available for configuration:
Interface:
The SpeedTouch™ interface to which the DHCP pool applies.
Start Address:
The start IP address of the DHCP server’s address pool.
End Address:
The end IP address of the DHCP server’s address pool.
Subnet Mask:
The subnet mask of the DHCP server’s address pool.
Server:
The SpeedTouch™ IP address used as DHCP server address.
Gateway:
The IP address that will be assigned to the DHCP clients as their default
gateway.
Primary DNS:
The IP address of the primary DNS server.
Secondary DNS:
The IP address of the secondary DNS server.
Primary WINS:
The IP address of the primary WINS server.
Secondary WINS:
The IP address of the secondary WINS server.
Lease Time:
The time for which the DHCP client is allowed to use the assigned IP address:
Always give same address to DHCP clients:
Select this check box if you always want to use the same IP address for the
DHCP clients.
Both the start and end IP address define the IP address range used by
the DHCP server to assign leases.
If you select Always give same address to DHCP clients, the lease time
will be automatically set to Infinite.