Filter
Top Products
Chapter 4
Voice over IP
E-DOC-CTC-20050401-0008 v1.0
49
Enable the telephony
service
Proceed as follows:
1 Go to the SpeedTouch™ web pages.
2 In the menu select Toolbox > Telephony.
3 On the top right, click Configure.
4 Select Service Enabled.
5 Click Apply.
Assign phone numbers To configure your Internet SIP telephone numbers:
1 Go to the SpeedTouch™ web pages.
2 In the menu select Toolbox > Telephony.
3 On the top right, click Configure.
4 Assign phone numbers to phone port 1 (FXS1) and phone port 2 (FXS2). If you
want to use the same number for both ports, select Port ‘all’.
5 Click Apply.
For more information, see “1.3.1 Access via the Web Interface” on
page 11.
The phone numbers are provided by your provider.