Renesas M16C/6N4 Network Card User Manual


 
M306NKT-EPB User’s Manual 2. Setup
REJ10J0519-0200 Rev.2.00 Oct. 16, 2006 Page 25 of 104
2.5 Connecting the Power Supply for the Emulator
The power is supplied from AC adapter to the emulator PC7501. Here following explains how to connect the AC adapter.
(1) Turn OFF the power to the PC7501.
(2) Connect the DC cable of the AC adapter to the PC7501.
(3) Connect the AC power cable to the AC adapter.
(4) Connect the AC power cable to the outlet.
CAUTION
Cautions for AC Adapter:
z Use only the AC adapter included in PC7501 package.
z The included AC adapter is for PC7501. Do not use it for other products.
z Before installing this equipment or connecting it to other equipment, disconnect the AC power cable from its
outlet to prevent injury or accident.
z The DC plug on the included AC adapter has the below polarity.
z The included AC adapter has no power supply switch. The AC adapter is always active while connecting the
AC power cable. Check if the power is supplied by the LED of the AC adapter.