Filter
Top Products
M306NKT3-RPD-E User’s Manual 4. Hardware Specifications
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006 Page 89 of 104
4.5.2 External Dimensions of the M30800T-PTC
Figure 4.9 shows external dimensions of the converter board M30800T-PTC for a 100-pin LCC (included with the
M306NKT3-RPD-E).
1
30
31
50
CN2
CN1
100
81
80
51
MADE IN JAPAN
55.0
40.0
13.5
13.5
M30800 T-PTC
10.8
16.3
[External dimension when connecting 100-pin LCC socket ]
Unit: mm
*1 When using the AXS 4003M295C made
by Matsushita Electric Works , Ltd., and
IC 61-1004 -051 made by Yamaichi
Electronics Co ., Ltd, be sure to create foot
patterns for the holding metal fixtures in
four locations .
*2 When using the AXS 4003M295C made
by Matsushita Electric Works , Ltd., note
that the contacts of the IC socket proper
touch the PC board in the shaded section .
Therefore , be especially careful with
pattern wiring to ensure that other pins will
not be shorted . (Through holes are not
accepted .)
0.65
0.35
19.2
12.8
18.85
19.90
26.10
12.35
16.1
24.5
4-R0.25
Foot pattern for
holding metal fixture *1
Pattern wiring *2
13.8
21.4
27.6
19.9
Unit: mm
Figure 4.9 External dimensions of the M30800T-PTC