Filter
Top Products
( 9 / 54 )
WARNING
Warning for Installation:
• Do not set this product in water or areas of high humidity. Spilling water or some other liquid into
the main unit can cause an unrepairable damage.
Warnings for Use Environment:
• The emulation pod is air-cooled with the ventilation slot. Therefore, do not block the ventilation
slot. When heated to high temperatures, the emulation pod may not work properly.
• This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care
should be taken that this temperature is not exceeded.
CAUTION
Caution to Be Taken for Modifying This Product:
• Do not disassemble or modify this product. Disassembling or modifying this product can cause
damage. Disassembling and modifying the product will void your warranty.
Cautions to Be Taken for Handling This Product:
• Use caution when handling the main unit. Be careful not to apply a mechanical shock.
• Do not touch the connector pins of the emulator main unit and the target MCU connector pins. Static
electricity may damage the internal circuits.
•Do not pull the pod probe by the flexible cable for connecting to the emulator main unit or the
flexible cable PCA7733 REV.B for connecting the target system. The cable may cause a break.
• The flexible cable for connecting to the emulator main unit or the flexible cable PCA7733 REV.B
for connecting the target system are different from earlier models. The slits make them more
flexible. However, excessive flexing or force may break conductors. Figure 1.1 (next page) shows
the examples of excessively flexed cables and how to handle them.
•Do not use inch-size screws for this equipment. The screws used in this equipment are all ISO
(meter-size) type screws. When replacing screws, use same type screws as equipped before.