Filter
Top Products
Various Scan Settings
108
5
Stamp
This section explains the procedure for stamping on originals scanned from the
ADF.
Important
❒ To enable stamping, you must install the optional Refax stamp cartridge.
A Press [Options].
B Press {U} or {T} to select [Stamp], and then press {OK}.
C Select [On], and then press {OK}.
"Programmed" appears, and then the Send Options screen reappears.
D Press {Escape}.
Note
❒ Stamping may continue even if scanning is interrupted, depending on the
cause of interruption.
❒ Replace the stamp cartridge when Stamp begins to fade. For details, see
"Replacing the Print Cartridges" and "Replacing the Transmission Stamp
Cartridge", in Troubleshooting.
❒ [Stamp] appears only if the ADF is installed.