Filter
Top Products
Copier Functions
37
2
Staple
An optional finisher and the bridge unit are required for this function.
Each copy set can be stapled together.
Note
❒ You cannot use the bypass tray with this function.
Reference
Related initial settings
p.103 “Select Stapling Position”
Stapling position and original setting
Place all the originals in the ADF in the orientation in which they can be read
normally. When placing the original on the exposure glass, keep the same orien-
tation, but set the original facing downwards. When there is copy paper that is
identical in size and orientation to your original, the staple positions are as fol-
lows:
AdonisC4-EN_copy_F_FM_forPaper.book Page 37 Thursday, May 12, 2005 4:04 PM