Filter
Top Products
Edit
93
3
❖ Erase Border Width
You can specify the width of the erased border margins with this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
❖ Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1" boundary
margin around all four edges of each original.
The default setting is On.
❖ Erase Center Width
You can specify the width of the erased center margins with this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
❖ Front Cover Copy in Combine
You can make a combined copy on the front cover sheet when you select
Front Cover mode.
The default setting is Combine.
❖ Copy Order in Combine
You can set the copy order in Combine mode to Left to Right or Top to Bot-
tom.
The default setting is From Left to Right.
❖ Orientation: Booklet, Magazine
You can select the orientation of copies to open when using Booklet or Mag-
azine mode.
The default setting is Open to Left.
❖ Copy on Designating Page in Combine
You can specify whether to make a combined copy on the inserted slip sheets
in Desig./Chapter mode.
The default setting is Combine.
GCST019E
GCAH090E