Ricoh 8060 All in One Printer User Manual


 
Connecting the Machine
24
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with an
IEEE 802.11b (wireless LAN) connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
As to [Effective Protocol], check if the protocol to use is set as [Active].
[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
If [Delivery Option] is set to [On], check that IPv4 Address is set.
Heading Setting Item Setting Requirements
Interface Settings/Network
Machine IPv4 Address Necessary
Interface Settings/Network
IPv4 Gateway Address As required
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
DDNS Configuration As required
Interface Settings/Network
Domain Name As required
Interface Settings/Network
WINS Configuration As required
Interface Settings/Network
Effective Protocol Necessary
Interface Settings/Network
LAN Type Necessary
Interface Settings/Network
Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL / TLS Communication As required
Interface Settings/Network
Host Name As required
Interface Settings/IEEE 802.11b
Communication Mode Necessary
Interface Settings/IEEE 802.11b
SSID Setting As required
Interface Settings/IEEE 802.11b
Channel As required
Interface Settings/IEEE 802.11b
Security Method As required
Interface Settings/IEEE 802.11b
Transmission Speed As required
File Transfer Delivery Option As required
File Transfer Fax RX File Transmission As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required