Filter
Top Products
Copier/Document Server Features
104
3
❖ Memory Full Auto Scan Restart
When memory becomes full while scanning originals, the machine can make
copies of scanned originals first, and then automatically proceed scanning re-
maining originals.
The default setting is Off.
•On
You can leave the machine unattended to make copies, but sorted pages
will not be sequential.
•Off
When memory becomes full, the machine stops operation allowing you to
remove the copy pages delivered on the output tray.
❖ Letterhead Setting
If you select [Yes] in this function, the machine rotates the image correctly.
The default setting is No.
Orientation-fixed (top to bottom) or two-sided paper might not be printed
correctly depending on how the originals and paper are placed.
❖ Staple Position
Specify which Top 2 staples or Bottom shown on the initial display with pri-
ority.
The optional 3,000Sheet Finisher, or Booklet Finisher is required to use this
function.
The default setting for “Staple Position 1” is Top 1.
The default setting for “Staple Position 2” is Center.
The default setting for “Staple Position 3” is Left 2.
The default setting for “Staple Position 4” is Top 2.
❖ Punch Type
Specify which punch type (2 holes or 3 holes) has priority to be shown on the
initial display.
The optional 3,000Sheet Finisher, or Booklet Finisher is required to use this
function.
The default setting for “Punch Type 1” is 2 Holes Left.
The default setting for “Punch Type 2” is 2 Holes Top.
❖ Simplified Screen: Finishing Types
You can select which key is displayed with higher priority for “Finishing
Types” on the Simplified Screen.
The default setting for “Simplified Screen: Finishing Types 1” has not been set.
The default setting for “Simplified Screen: Finishing Types 2” has not been set.
The default setting for “Simplified Screen: Finishing Types 3” has not been set.
Reference
“Orientation-Fixed Paper or Two-Sided Paper”, Troubleshooting
“Batch mode”, Copy/ Document Server Reference
“Sort”, Copy/ Document Server Reference