Filter
Top Products
Connecting the Machine
14
1
Note
❒ IPv6 can be used only for the printer function.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when optional wireless LAN board is installed. If Eth-
ernet and IEEE 802.11b (wireless LAN) are both connected, the selected inter-
face has priority.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for using the printer or LAN-Fax function
with an IEEE 802.11b (wireless LAN) connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Interface Settings/Network
Permit SSL / TLS Communication As required
Interface Settings/Network
Host Name As required
Interface Settings/Network
Machine Name As required
Heading Setting Item Setting Requirements
Interface Settings/Network
Machine IPv4 Address Necessary
Interface Settings/Network
IPv4 Gateway Address As required
Interface Settings/Network
Machine IPv6 Address As required
Interface Settings/Network
IPv6 Gateway Address As required
Interface Settings/Network
IPv6 Stateless Address Autoconfiguration
As required
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
DDNS Configuration As required
Interface Settings/Network
Domain Name As required
Interface Settings/Network
WINS Configuration As required
Interface Settings/Network
Effective Protocol Necessary
Interface Settings/Network
NCP Delivery Protocol As required
Interface Settings/Network
NW Frame Type As required
Interface Settings/Network
SMB Computer Name As required
Interface Settings/Network
SMB Work Group As required
Interface Settings/Network
LAN Type Necessary
Interface Settings/Network
Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL / TLS Communication As required
Heading Setting Item Setting Requirements