Filter
Top Products
Network Settings
25
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
an Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected,
the selected interface takes precedence.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Heading Setting Item Setting Requirements
Interface Settings/Network
Machine IPv4 Address Necessary
Interface Settings/Network
IPv4 Gateway Address As required
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
DDNS Configuration As required
Interface Settings/Network
Domain Name As required
Interface Settings/Network
WINS Configuration As required
Interface Settings/Network
Effective Protocol Necessary
Interface Settings/Network
LAN Type Necessary
Interface Settings/Network
Ethernet Speed As required
Interface Settings/Network
Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL / TLS Communication As required
Interface Settings/Network
Host Name As required