Filter
Top Products
1. While pressing the [ID] button, press the number button that corresponds to the ID
number of the projector to be operated for three seconds or more.
CLB020
The ID number assigned to the remote control is changed.
2. Operate the projector.
• The remote control cannot operate a projector unless the ID on the remote control is the same as
the controller ID specified in the projector's Default Settings menu.
• The ID number specified in the remote control is effective until a different ID number is specified.
• The ID number in the remote control must be specified again if the batteries are changed.
1. Preparations for Using the Projector
20