Filter
Top Products
Item Command
Acknowledge
(Normally ended)
*
Icon display on ICN:1 =ICN:1
Icon display off ICN:0 =ICN:0
Auto setting (RGB input) PAT =PAT:SC0
Status display on DON =DON:SC0
Status display off DOF =DOF:SC0
RGB input INP:1 =INP:1
Y/Pb/Pr input INP:2 =INP:2
HDMI input INP:5 =INP:5
Video input INP:9 =INP:9
*
CR is added to the end of "Acknowledge (Normally ended)".
• The control port is for service representatives or administrators of the projector.
• A USB driver must be installed to control the projector using the control port. For details, contact
your service representative.
6. Appendix
90