Filter
Top Products
Copying
58
2
Reference
The erase width is set to 10 mm
(0.4”) as a default. You can
change this setting with User
Tools.
p.97 “Erase Center Width”
p.97 “Erase Border Width”
Note
❒ The relationship between the orig-
inal orientation and the erased part
is as follows:
❒ 1: Erased part
❒ 2: 2–99 mm (0.1”–3.9”)
Border Erase
A Press [Edit/Stamp].
B Press [Erase].
C Set the erase border width.
Selecting [Same Width]
A Press [Same Width].
B Set an erase border width with
[n] and [o].
Note
❒ To change the value entered,
press [n] and [o] to set the
new value.
C Press [OK].
Selecting [Diff. Width]
A Press [Diff. Width].
B Press the key for the border
you want to change and set an
erase border width with [n]
and [o].
C Press [OK].
D Press [OK].
E Place your originals, and then
press the {Start} key.
L original K original
AdonisC4-EN_copy_F_FM_forPaper.book Page 58 Thursday, May 12, 2005 4:04 PM