Filter
Top Products
18
2 Basic Operation
The POWER LED lights up
When the power is turned on for the first
time, or turned on after removing the ink
Be sure to mount the drain bottle before turning on the power. Refer to section "2-1 Attach the Drain Bottle".
2-3 Powerup
When using for the first time turn on the main power switch on the
rear of the unit.
* Leave the main power switch on, and turn the power off and on in
daily use with the sub power switch.
1
Press the [POWER] key on the operation panel.
2
Roland FJ-50
Ver.1.00
Roland FJ-50
UNKNOWN INK TYPE
SELECT INK TYPE
PIG.CMYKLcLm
INSTALL
DRAIN TANK
NOW FILLING INK
Select the installed ink type and
press the [ENTER] key.
No ink is filled.
Attach the drain tank, and
press the [ENTER] key.
The system will execute ink fill.
This operation takes several minutes.
PIG. CMYKLcLm/PIG. CMYKOrGr/DYE CMYKLcLm
The POWER LED lights up