Filter
Top Products
User Manual
Publication date: March, 2007
Revision A1
47
4. Operation of
Web-based Management
This chapter instructs you how to configure and manage the 24-Port GbE
Web Smart Switch through the web user interface it supports, to access and
manage 20 10/100/1000Mbps TP Port and 4 Gigabit TP/SFP Fiber dual media port.
The switch provides 20 fixed Gigabit Ethernet TP ports and four optional Gigabit
dual media ports supporting either fiber or TP media. With this facility, you can
easily access and monitor through any one port of the switch all the status of the
switch, including MIBs status, each port activity, multicast traffic, and so on.
The default values of 24-Port GbE Web Smart Switch are listed in the table
below:
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.254
Password
admin
Table 4-1
After the 24-Port GbE Web Smart Switch has been finished configuration,
you can browse it by using the IP address you set up. For instance, type
http://192.168.1.1
in the address row in a browser, it will show the following screen
(see Fig.4-1) and ask you inputting password in order to login and access
authentication. The default password is “admin”. For the first time to use, please
enter the default password, then click the <Apply> button. The login process now is
completed.
In the switch, it supports a simple user management function allowing only
one administrator to configure the system at the same time.
To optimize the display effect, we recommend you use Microsoft IE and have
the resolution 1024x768.
Here is the whole function tree with web user interface and we will travel it
through this chapter.