Filter
Top Products
User Manual
Publication date: March, 2007
Revision A1
57
Fig. 4-6 Metro mode
4-2-4. VLAN Group Configuration
Function name:
VLAN Group Configuration
Function description:
It shows the existed information of VLAN Groups List and maintains them, i.e.
modify and delete one of them. User also can add a new VLAN group by
inputting a new VLAN name and VLAN ID.
If you are in port-based VLAN, it will just show the ID、Member of the existed
port-based VLAN group. If you are in tag-based VLAN, it will show the ID、
VID、Member of the existed tag-based VLAN group. The switch can store the
configuration of port-based VLAN and tag-based VLAN separately. When you
choose one of VLAN mode, the switch will bring you the responded VLAN
configuration which keeps the default data. You can easily create and delete a
VLAN group by pressing <Add> and <Delete> function buttons, or click the
Group ID directly to edit it.
Parameter description:
ID (Group ID):
When you want to edit a VLAN group, you must select the Group ID field.
Then, you will enter Tag Base VLAN Group Setting or Port Base VLAN
Group Setting page, which depends on your VLAN mode selection.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based mode.
Member:
In modify function this is used to enable or disable if a port is a member
of the new added VLAN, “Enable” means it is a member of the VLAN.
Just tick the check box (
) beside the port x to enable it.
Fig. 4-7 Port-Based VLAN Configuration