![](http://pdfasset.owneriq.net/8/d0/8d02fd75-624c-409e-97cc-51828faf0b0c/8d02fd75-624c-409e-97cc-51828faf0b0c-bg27.png)
Installation
Runco CL-810 Series Owner’s Operating Manual 27
PRE
L
IMINAR
Y
RS-232 Controller
Connection
Connect a PC or home theater control/automation system (if present) to the RS-232 port
on the CL-810; see
Figure 3-11. Use a standard, 4-wire RJ-11 telephone cable, wired
straight-through.
For more information about using this connection, refer to Serial Communications on
page 53.
Figure 3-11. RS-232 Control System Connection
S-VID /
S-VID