Filter
Top Products
Operation
Runco VX-2000d Owner’s Operating Manual 61
PRE
L
IMINAR
Y
Fan Mode: If the projector is being used in a high-altitude environment, use the Fan
Mode control to prevent it from overheating. Set it to High Altitude (2) to run the fan at high
speed; set it to Normal (1) to run the fan at normal speed.
Orientation: Refer to Adjusting the Picture Orientation on page 32.
Factory Default: To reset all projector settings (including image settings) back to their
factory defaults, choose
Factory Default from the Options menu. When the confirmation
message appears, select All Reset to perform the reset or Return to cancel. This action
is not undoable. Proceed with caution!
The Factory Default command does not reset the Lamp Timer or
OSD Language setting.
Note