Filter
Top Products
Installation
14 Runco VX-2ix Owner’s Operating Manual
3.2
Quick Setup
Table 3-1 gives a quick overview of the VX-2ix installation process. The sections following
this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1 Choose a location for the projector 15
2
Install CineWide (secondary anamorphic) lens (optional) 19
3 Connect signal sources to the projector 21
4 Connect external controller to RS-232 port (optional) 25
5 Connect AutoScope lens motor or other home theater
equipment to 12-volt trigger outputs (optional)
25
6 Apply power to the projector 26, 27
7 For rear-screen and/or ceiling-mount installations, select
the proper picture orientation
27
8 Lens adjustments: projected image size (zoom), position
(shift) and focus
17, 28
9 Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
30 through 37
Note