Filter
Top Products
12 Runco VX-33i Installation/Operation Manual
PRE
L
IMINAR
Y
6. Memory Preset Buttons:
CUST1
Press to recall settings for the current input from the “Custom 1” memory preset.
ISF NIGHT
Press to recall settings for the current input from the “ISF Night” memory preset.
ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
CUST2 (THX)
Press to recall settings for the current input from the “THX” memory preset.
7. Aspect Ratio Selection Buttons
Use these buttons to select an aspect ratio directly, as follows:
16:9
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4:3
Scales the input signal to fit 4:3 display mode in the center of the screen.
LBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
VWIDE (VirtualWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material.
VCINE (Virtual Cinema – CineWide-equipped projectors only)
Selects the Virtual Cinema aspect ratio, used for viewing 16:9 source material on a
2.35:1 screen.
8. 0 - 9
Use these keys to enter numeric characters.
9. Motorized Lens Controls:
FOCUS
To focus the image, press FOCUS. Then, press and hold the UP or DOWN button.
When finished, press MENU or EXIT.
ZOOM
To adjust the projected image size, press ZOOM. Then, press and hold the UP
button to zoom in (enlarge) or the DOWN button to zoom out (reduce). When finished,
press MENU or EXIT.
LENS (Lens Shift)
To adjust the lens position, press LENS. Then, press and hold the RIGHT, LEFT, UP
or DOWN button. When finished, press MENU or EXIT.