Sam4s ER-390M Cash Register User Manual


 
ER-390M Program Mode Programming 93
Program 150 – PLU Group Assignment
Each PLU may report to any three of 20 groups. Group totals appear on reports, so that you can
track sales of different types of items. A group can also be used to designate items that are to print
on an optional kitchen printer.
Note: The PLU will report to group “0”, if not programmed to report to groups 1-20.
1. Turn the control lock to the P position.
2. To begin the program, enter 1 5 0, press the SBTL key.
0 SBTL5 1
3. Select the PLU or PLUs you wish to program in one of the following ways:
Press a PLU key on the keyboard, or
PLU
Press the first PLU keys that are to receive the same status and Press the
last PLU keys, or
PLU PLU
Enter up to 14 digit number of the PLU and press the PLU key, or
PLU
Enter the PLU#,
up to 15 digits
Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range;
press the PLU key.
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
4. Enter up to three 2-digit numbers representing the groups where you wish to
add the PLUs sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four.
Press the X/TIME key.
X/TIME
2
nd
Grou
p
1
st
Grou
p
3
rd
Grou
p
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH