Filter
Top Products
You can perform bi-directional mapping between serial devices that are attached to the Thin
Client (e.g. scanners, serial printers) and the Citrix Server's COM ports. This enables
programs running on the server to exchange data with the local devices.
COM Port Devices
Select the COM port your device is attached to from this drop-down box: /dev/ttyS0 stands for
the local COM1 and /dev/ttyS1 stands for the local COM2.
Firewall
This “
Firewall
” page allows you to configure ICA connections through a firewall or a SOCKS
proxy server. (Firewalls and SOCKS proxy servers are used on networks to improve security.)
Use Alternate Address
If you are using ICA sessions to connect to a specific Citrix server behind a firewall, you have
to activate this option. The Citrix server (usually) has a different IP in the local network than
from the outside world. (For details on server configuration, look up the “
altaddr
” command in
your Metaframe admin manual.)
Connect via SOCKS or Secure Proxy Server
You can configure the ICA sessions to connect to a Citrix server through a SOCKS proxy
server or a Citrix Secure Gateway (in relay mode).
A
fter enabling the alternate address, add the server in the “
Address List
” in the “
Server
Location
” box of the “
Global ICA Settings
”
To make the "
Secure Gateway
" field accessible, the "
Browser Protocol
" in the "
Server
Location
" tab has to be set to "
SSL/TLS + HTTPS
"
Auto Reconnect
The options are self explanatory