Filter
Top Products
This menu allows time settings for the STC to be configured. The available options to be set are
Date
This menu section allows you to configure the date settings for the STC. The available options are
z
Year: -
Enter the year you want to set the date to.
z Month: -
Enter the month you want to set the date to.
z
Date: -
Enter the day number of the month you want to set the date to.
Time
This menu section allows you to configure the time settings for the STC. The available options are
z Time to Set: -
Set the time by setting hours, minutes and seconds.
z
AM/PM Display: -
This is activated only if 12 hour display format is chosen.
z
Time Format to Be Used: -
Use 12 hour or 24 hour format for time display.
Time Zone
This menu section allows you to configure the time zone settings for the STC. The available
options are
z
Time Zone Selection Menu
z
Enabling/disabling Daylight Saving Time
Network Time Protocol (NTP)
This menu section allows you to configure the settings for updating time from a server using NTP.
The only available options is the server IP where the time server is located from which the time is
to be updated using NTP.
S
y
stem
It contains the STC hardware and software configurations within the following fields:
z
Manufacturer: -
Displays the name of the Manufacturer.
z
Model Name: -
Displays the name of the STC Model. It can either be "Sync Master 711
LT" (for 17" panel device) or "Sync Master 911 LT" (for 19" panel device).
z
Software Version: -
Denotes the version of the Software currently in use by the STC.
z
Memory: -
Displays the information regarding the memory that is currently available to the
STC.
z
Flash Size: -
This field gives information regarding the Flash Disk Memory size of the STC.
z
Terminal Name: -
Here you can set the name of the terminal for your STC.