Filter
Top Products
69
Setup and Reset
7
7 Setup and Reset
4 If an HDMI cable is connected, press [ ] to move to HDMI and press [ ]. The input source will
change to HDMI mode.
7.1.6 USB Super Charging
A source device's battery can be charged quickly via USB 3.0 port on the product.
z Data transmission is not available if USB Super Charging is on.
z To enable standard charging or data transmission, set USB Super Charging to off.
z The input source does not need to be changed.
Configuring USB Super Charging
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET, and press [ ] on the product.
3 Press [ ] to move to HUB, and press [ ] on the product.
4 Press [ ] to move to USB Super Charging, and press [ ] on the product. The following screen
will appear.
z Off: Disable USB Super Charging.
z 1 Port: Enable a single USB 3.0 port (marked with a charging icon) for quick battery charging.
Quick battery charging is available only through one USB 3.0 port (it is found on the left side
and is the port closest to you when facing the front of the monitor).
z 2 Ports: Enable two USB 3.0 ports for quick battery charging.
5 Press [ ] to move to the option you want, and press [ ] .
6 The selected option will be applied.
Return EnterMove
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Off
Disconnected
Disconnected
2II
Connected
Disconnected
m
Return EnterMove
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Off
Disconnected
Disconnected
Disconnected
Disconnected
Off
1 Port
2 Ports