Filter
Top Products
• Install the USB driver.
•
As USB port can be unstable, reboot your PC.
• PC's USB port may be faulty. Please try to connect different port.
• USB monitor may not work on USB 1.0.
• Any input from mouse or keyboard will activate the display if it is under the power
saving mode.
3. I can't install USB Driver with the supplied CD.
• Download USB driver at Samsung Electronics website and install it.[ http://www.sam-
sung.com ]
4. After installing USB Driver, The computer performance is slow.
• As USB Driver takes more memory than the use of general graphic card, computer
performance may be lower than before.
5. After booting the PC, screen order is changed.
• Update your graphic card to the latest version.
Note
For graphic card driver, refer to graphic card manufacturer's home page.
6.
Monitor resolution is changed.
• Please make a reference to [USB Monitor Installation guide]- 'Display Information
Setup for USB Monitor' for best resolution
[Best Resolution - LD190/LD190G: 1360X768, LD220/LD220G: 1920x1080]
7. While playing high quality video file, choppy video can be seen repeatedly.
• When you watch high quality video file in full screen mode, it may play properly due
to limited USB bandwidth. It is strongly recommend to decrease the window size of
the movie player. Depending on PC interface or incompatible codec packs, it can
cause serious playback issues, such as flickering or choppy video on the screen.
8. I can use Clone mode, but can't set to extend mode.
• Update your graphic card to the latest version.
Note
For graphic card driver, refer to graphic card manufacturer's home page.
• Right
click 'Desktop' -'Property' - 'Settings' tab. Check 'Extend my windows desktop
onto this monitor'.
• If graphic card does not support WDDM, Extend mode can not be used in windows
Vista. e.g.,) Some versions in Matrox Card.
9. How can I remove the ‘USB Monitor Installation Program’ completely?
• Click ‘Add/Remove Programs’ in the ‘Control Panel’. A list of ‘Currently Installed Pro-
grams’ is displayed.
• Select ‘Samsung UbiSync Monitor’ from the list and click ‘Remove’.
Connections