Filter
Top Products
6
Paper Handling
3. Load the print material in the automatic feeder. Do not load too
much print material. Do not different paper types. See the
following directions on how to load each type of print material.
¥ Load paper or transparencies with the print side facing you.
¥ For transparencies:
- Hold the transparencies by the edges and avoid touching the
print side.
- Fan the stack of transparencies to prevent feeding failures. Be
careful not to scratch or leave fingerprints on the print sides.
Place the print side facing you.
01-Setup 7/16/99 2:04 PM Page 6