Filter
Top Products
90
Upgrading Memory
One or more memory modules are installed on the computer.
There are 2 memory slots and users can replace the installed memory or add new memory.
Before You Start!
Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the
computer is in Sleep mode.
Disconnect main power plug and remove the battery before continuing.
To utilize the dual channel feature, using memory modules with the same specications (of the same capacity and from the
same manufacturer) is recommended.
Only use the same type of memory as specied in the Product Specication.
You must use only memory modules with the specications (DDR2 or DDR3) printed on the memory slot that appears when
you open the memory compartment cover at the bottom.
Adding a Memory Module
1
Remove the screw on the memory compartment
cover at the bottom of the computer using a screw
driver.
Fixing Screw
2
Insert a new memory module into the memory slot at
an angle of approximately 30 degrees aligning it to
the angle of the memory slot.
Memory Slot
e.g)in the case of using DDR2
Bremen_R530_V7_eng.indb 90 2011-04-27 오후 5:29:22