142
Upgrading Memory
One or more memory modules are installed on the computer.
There are 2 memory slots. One is inside the main board and the other is at the bottom of the computer.
You can only add or replace memory to and from the memory slot at the bottom of the computer.
Before You Start!
■
Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the
computer is in Sleep mode.
■
Disconnect mains power and remove the battery before continuing.
■
Toutilizethedualchannelfeature,usingmemorymoduleswiththesamespecications(ofthesamecapacityandfromthesame
manufacturer) is recommended.
■
OnlyusethesametypeofmemoryasspeciedintheProductSpecication
Adding a Memory Module
1
Remove the screw on the memory compartment
cover at the bottom of the computer using a screw
driver.
2
Insert a new memory module into the memory slot at
an angle of approximately 30 degrees aligning it to
the angle of the memory slot.
Fixing Screw