Samsung Q46c Laptop User Manual


  Open as PDF
of 199
 
177
Q
How can I receive a FAX in Sleep mode (Standby
Mode)?
A ToreceiveaFAXwhenthecomputerisinSleep
Mode(StandbyMode),thecomputermustbe
conguredasfollows.
TheFAXprogrammustbeconguredsothatit
receivesFAXESautomaticallyreferringtotheFAX
programmanual.
ClickStart > Control Panel > Hardware and
Sound.
ClickonPhone and Modem Options.
In the Modemtab,selectaninstalledmodem
andclickProperties.
InthePowerManagementtaboftheModem
Propertieswindow,selecttheWake up the
computer with this deviceoptionandclickthe
OKbutton.
(If the Power Management tab does not
appear, select Change Settings in the
General tab.)
Whenthemodemisconguredasabove,andaFAX
arrives,thecomputerwakesupfromSleepMode
andreceivestheFAX.
Q
The <Wake On LAN> function
A1 <WakeOnLAN>isafunctionthatactivatesthe
systemfromSleepmodewhenasignal(suchas
apingormagicpacketcommand)arrivesoverthe
network(wiredLAN).
Using the <Wake On LAN> Function
ClickStart > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.
Right-clickontheLocalAreaConnectionand
selectProperties.
ClickCongure > Power Management
tab.SelectAllow this device to bring the
computer out of standby,thenclickOK.
Restartthesystem.
—
IfthesystemisactivatedfromSleepmodewhen
thereisnoreceivedsignal,usethesystemafter
disablingthe<WakeOnLAN>function.
—
Whenturningthepoweroffwhen<WakeOn
LAN>isdisabled,theLANLEDmaycontinueto
belit.
—
ConnectingawiredLANwhileusingawireless
LANmaynotactivatethe<WakeOnLAN>
function.SettheWirelessLANtoDisable to use
the<WakeOnLAN>function.
Wired Network (LAN) Related
 previous next