Filter
Top Products
84
85
Chapter 3.
Settings and Upgrade
Upgrading Memory
4
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
Memory Slot
5
Push the memory module down so that it is completely fi xed.
If the memory does not fi t easily, push the memory module
down while pulling the memory module latches outward.
6
Close the memory compartment cover and fasten the screw.
Removing a memory module
Pull the memory module latches outward.
The memory module will pop up.
Remove the memory module out at an angle of 30 degrees.