Filter
Top Products
86
Chapter 3.
Settings and Upgrade
Battery
Please refer to the following instructions when running the
computer on battery power without connecting the AC power.
This computer is equipped with an internal battery.
Precautions
Users cannot separate or replace the internal battery. •
To separate or replace the battery, use an authorized •
service center. You will be charged for this service.
Use only chargers specifi ed in the User Manual.•
Never heat the battery pack, put it near or in a fi re or use at •
a temperature higher than 60°C, as this may cause fi re.
Please refer to the system operation environment of •
this manual and operate and store the battery at room
temperature.
Before using the computer for the fi rst time, make sure to •
connect the AC adapter and charge the battery completely.
The images used for the illustration are of a representative •
model, therefore the images may diff er from the the actual
product.
Charging the Battery
1
An internal battery is embedded. Connect the AC adapter to
the power input jack of the computer. The battery will start
charging.
2
When charging is complete, the Charge LED turns green.
Status Charge LED
Charging
Red or Orange
Charging complete
Green or Blue
AC adapter not
connected
O ff
The location of the internal battery