Filter
Top Products
ENG
SADT-103WM_9
10. Insert the joined cable into the Wall Mount Adaptor through the Cover Fixing Part.
Insert one piece of the two-strand cable into an empty area of the Wall Mount Adaptor
as in the figure below and push the other one into the Wall Mount Adaptor.
(Ensure that the insulated coating of the cable should be kept intact while the insertion)
11
. Use 2 screws (M3xL4, suported) to fix the Cover to the Wall Mount Adaptor.
WALL MOUNT ADAPTOR
SCREW
COVER
WALL MOUNT ADAPTOR WALL MOUNT ADAPTOR
< Insert one piece of the two-stranded cable > < Insert the other piece of the two-stranded cable >
the place for joining a cover
SADT-103WM_ENG.indd 9 2008-03-18 오전 9:14:01