Filter
Top Products
4_SADT-103WM
6. Turn the Holder Housing clockwise by 18 degrees. Then, use 3 screws(M4×L8,
suported), to fix the Holder Housing to the Wall Mount Adaptor.
7. According to the status of connected cable of the OUTDOOR HOUSING, SHG-221/222),
a way of installation is different as follows.
If the cable pipe is installed inside of the wall
Use the Cable Grand to connect the external cables with the Cover Plate.
- You should use only the Grand Cable for waterproof purpose. Furthermore, it is
recommended to keep the cable about 150mm longer than the Cover Plate.
COVER PLATE
150 mm
CABLE GRAND
WALL MOUNT ADAPTOR
WALL MOUNT ADAPTOR
HOLDER
HOUSING
HOLDER HOUSING
SCREW
Turn to the clockwise
about 18 degrees
SADT-103WM_ENG.indd 4 2008-03-18 오전 9:13:54