Filter
Top Products
ENG
SADT-103WM_3
4. Prepare the Holder Housing from the Outdoor Housing and insert the cables of the Holder
Housing into the Wall Mount Adaptor before pulling them out through the hole of the
Cover Fixing Part.
5. Fit the Guide of the Holder Housing into the corresponding Guide Hole of the Wall Mount
Adaptor while inserting the Holder Housing into the Wall Mount Adaptor.
- Install the Holder Housing so that the “FRONT” label faces the front of the camera.
- Make sure that the Bush Cable should not be loose from the Holder Housing.
(If the Bush Cable is not secured firmly, the product is not properly waterproof.)
HOLDER HOUSING
WALL MOUNT ADAPTOR
BUSH CABLE
GUIDE HOLE
GUIDE
WALL MOUNT ADAPTOR
CABLE
HOLDER HOUSING
The place for
joining a COVER
WALL MOUNT ADAPTOR
HOLDER HOUSING
SADT-103WM_ENG.indd 3 2008-03-18 오전 9:13:53