Filter
Top Products
Wireless network setup
163
2. Using a Network-Connected Machine
4
Select the Wireless Setting and Installation option.
• Install Now: If you have set the wireless network, click this button to
install the machine’s driver to use the wireless network machine. If
you have not set the wireless network, click Wireless Setting and
Installation button to set the wireless network before you click this
button.
• Wireless Setting and Installation: Configure the wireless network
settings of your machine’s with a USB cable then install the machine
driver. This only for users who have not set up the wireless
connection before.
5
Read the License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
6
The software searches the wireless network.
If the software has failed to search the network, check if the USB cable is
connected properly between the computer and machine, and follow the
instruction in the window.
7
After searching the wireless networks, a list of wireless networks your
machine has searched appears.
If you want to use the Samsung default ad hoc setting, select the last
wireless network on the list, Network Name(SSID) is portthru and
Signal is Printer Self Network.
Then, click Next.
If you want to use other ad hoc settings, select another wireless network
from the list.
If you want to change ad hoc settings click the Advanced Setting button.
• Enter the wireless Network Name: Enter the SSID name you want (SSID
is case-sensitive).
• Operation Mode: Select ad hoc.
• Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
• Encryption: Select the encryption (None, WEP64, WEP128).
• Network Key: Enter the encryption network key value.