Filter
Top Products
Basic copying
63
2. Menu overview and basic setup
To select from the predefined copy sizes
1
Select (copy) > (Menu) > Copy Feature > Reduce/Enlarge on
the control panel.
2
Select the option you want and press OK.
3
Press (Stop/Clear) to return to ready mode.
To scale the copy by directly entering the scale rate
1
Select (copy) > (Menu) > Copy Feature > Reduce/Enlarge >
Custom on the control panel.
2
Enter the copy size you want using the numeric keypad.
3
Press OK to save the selection.
4
Press (Stop/Clear) to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of
your copy.
16
ID card copying
Your machine can print 2-sided originals on one sheet.
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item such as business card.
• The original must be placed on the scanner glass to use this feature.
• If the machine set to Eco mode, this feature is not available.
• For better image quality, Select (copy) > (Menu) > Copy
Feature > Original Type > Photo on the control panel.
1
Press ID Copy on the control panel.
2
Place the front side of an original facing down on the scanner glass
where arrows indicate as shown. Then, close the scanner lid.
3
Place Front Side and Press [Start] appears on the display.