Filter
Top Products
e-37
• Select PATTERN A using the Rotary Wheel and press ENTER to display the following
screen.
• Choose On/Off for the Motion, Alarm and Door-Bell features for all 8 cameras.
• Press the MENU button after completing the settings to return to the ALARM Menu.
• Repeat the same for PATTERN B.
• ???
RECORD...
• Select “RECORD…“ using the Rotary Wheel and press ENTER to display the following
screen.
AUDIO RECORD
Sets the channel that sends Audio signals to the recoding output.
SPOT-OUTPUT
Sets the output channel for SPOT which will intensely monitor that channel.
PB THROUGH
PB THROUGH is used only in the P.B. Mode. When you turn on this item, you can see
the output of the VCR. This function is effective for setting the VCR Menu or inspecting
the VCR for malfunction.
• Press the MENU button after completing the settings to return to the SYSTEM SETTING
Menu.
[PATTERN A]
CH MOTION ALARM DOOR-BELL
CH1 OFF -- OFF
CH2 OFF -- --
CH3 -- OFF OFF
CH4 OFF OFF OFF
CH5 OFF OFF OFF
CH6 OFF OFF OFF
CH7 OFF OFF OFF
CH8 OFF OFF OFF
[RECORD]
PB THROUGH OFF
AUDIO RECORD CH1
SPOT-OUTPUT CH1
1_SMO-210TP_E 10/18/02 5:19 PM Page e-37