Samsung SMO-210TP Computer Monitor User Manual


 
e-44
2. Motion Occurrence
The Motion option only becomes available when a camera with Motion features is connected.
1) When a Motion trigger is received, a warning buzzer sounds and the screen is divided
into 9 Live-Mode sub-screens. The word “EVENT ”appears on the screen and the Motion
occurrence information is displayed at the bottom right of the screen.
2) Press ENTER (in the middle of the Rotary Wheel) to replay the event in Event Replay
mode. Up to 15 screens can be replayed centering on the time of the Motion occurrence.
The duration of the replay is displayed in a graph.
Turn the Rotary Wheel during the Replay to forward or reverse the stored screens one by
one.
Press ENTER to terminate the Event Replay. The Event Replay will continue until
ENTER has been pressed.
3) Motion occurrence information is stored in the “EVENT LIST”.
4) Alarm Out (HOT, COLD) signals are active during “ALARM HOLD TIME”.
5) Recording output continues in Normal mode until the Motion is cleared. The recording
frequency of the corresponding channel increases.
6) Signal output continues as the Motion occurs and later clears.
02/06/01 12:30:01
EVENT
CH1 CH2 CH3
CH4 CH5 CH6
CH7 CH8
M 12345678
02/06/01 12:30:01
EVENT
CH1 CH2 CH3
CH4 CH5 CH6
CH7 CH8
MOTION
02/06/01
12:29:30
1
1_SMO-210TP_E 10/18/02 5:19 PM Page e-44