Filter
Top Products
e-48
Troubleshooting
You may encounter an unexpected problem while using this system that makes it hard to use
the system properly. In many cases, however, they are minor problems rather than serious
flaws in the system.
Refer to the following tips for some possible solutions.
‘
If the problem persists, contact the local sales representative or service center for support.
Note
If the problem is related to VCR recording or playback, check the VCR as well.
When power will not come on
When the screen does not appear
When record is not working
When playback is not working
When the screen does not appear
in the Auto Sequence Switch
Mode
• Make sure that the cord is properly plugged in.
• Check the power cable.
• Check the connections with the camera,
accessories and the external monitor.
• Make sure the Video In port of the VCR and the
VCR Accessory Video Out port of this system
are properly connected.
• Check if the tape inserted into the VCR is able to
record.
• Check that the REC Trigger Out port of the Time
Lapse VCR is properly connected to the VCR
Accessory VTI port of this system when you
record in the Time Lapse Mode.
• Make sure the Video Out port of the VCR and the
VCR Accessory Video In port of this system are
properly connected.
• Check if the Display Mode of this system is in
P.B. Mode or Triplex Mode.
• Check that the screen is in Live Mode.
• Check that the time of “SEQUENCE” under the
SETUP MENU is properly set.
1_SMO-210TP_E 10/18/02 5:19 PM Page e-48