Samsung SM-T320NZKAXAR Tablet User Manual


 
71
Scan and Connect to a Wi-Fi Network
When you turn on Wi-Fi, your device searches for and
displays available Wi-Fi connections.
1. From any screen, touch the top of the screen and
swipe downward. The Notification Panel displays.
2. Touch
Wi-Fi
to turn Wi-Fi
ON
(green). Your device
begins scanning for available Wireless Access Points.
Note:
To begin a new scan for available WAPs, touch
Scan
.
3. When the scan is complete, touch a Wi-Fi network to
connect. If the Wi-Fi network is open (unsecured), your
device automatically connects. If the Wi-Fi network is
secured, enter the password at the prompt to connect.
Tip:
You can have your device automatically notify you of
available networks. See
Network notification
under “Wi-Fi
Settings” on page 72.
Note:
When Wi-Fi is on, is displayed on the Status Bar.
Add a Wi-Fi Network Manually
1. From a Home screen, touch
Settings
Connections
tab
Wi-Fi
.
2. Touch the
OFF / ON
button to turn Wi-Fi ON .
3. Touch
Add Wi-Fi network
and enter the following:
Network SSID
: Enter the name of the Wi-Fi Wireless Access
Point (WAP).
Security
: Select the type of security used by the WAP.
Note:
Depending on the security protocol used by the WAP,
additional network information may be required, such as
a password.
Password
: If the WAP is secured, enter the password or
hex key.
4. Touch
Connect
.