Filter
Top Products
Using 3-6
• Projector Management
• You can check a projector's LED runtime, temperature, operation, errors, etc in real time.
: You can view a projector's Name, IP Address, Group, Power On/Off status, LED runtime, operation errors
(represented by icons), etc. in real time.
Samsung Projector Manager displays icons that indicate a projector's status. The icons are listed in the tables
below. If the icons indicate a problem with your projector, see "Clearing Indicator Problems" in secton 3-4, LED
Indications.
Warning and Error status icons
Temperature Level Status Icons
ICONS STATUS STATE ACTION
Error The LED has reached the end of its life.
Refer to Action 4 in Clearing Indicator
Problems.
Error The cooling fan 1 is not operating normally.
Refer to Action 1 in Clearing Indicator
Problems.
Error The cooling fan 2 is not operating normally.
Error The cooling fan 3 is not operating normally.
Error The cooling fan 4 is not operating normally.
Warning
The internal temperature of the projector has
risen higher than the limit.
Refer to Action 3 in Clearing Indicator
Problems.
Error
The internal temperature of the projector has
risen higher than the limit.
Refer to Action 3 in Clearing Indicator
Problems.
Error
The internal temperature of the projector has
risen higher than the limit.
Refer to Action 3 in Clearing Indicator
Problems.
ICONS STATUS STATE ACTION
Temperature status
The projector's internal temperature is
normal.(standby mode)
None. It's normal.
Temperature status
The projector's internal temperature is
normal.(low)
None. It's normal.
Temperature status
The projector's internal temperature is
normal.(medium)
None. It's normal.